PD109S type of Gas Detecting and Alarming Device
The PD109S type of gas detecting and alarming device is an intelligent & controllable product that can output 4-20mA current signal and can display it in real time.
Keywords:
alarming
gas
sensor
Category:
Gas detection & alarm device
Hotline:
Warm Tips: gas component and measured range can be customized according to actual needs, welcome to inquire us by phone (or email) for consultation!
Product Overview
The PD109S type of gas detecting and alarming device is an intelligent & controllable product that can output 4-20mA current signal and can display it in real time. This alarming device has characteristics of high stability, high accuracy and high intelligentization; it can detect and alarm on site through simple settings. It is mainly used in situations where the detections of combustible gases, oxygen as well as various toxic gases are required, displaying numerical indices of the detected gases; when the indice of certain kind of the on-site detected gas exceeds or falls below the set standard, then the DCS system will automatically perform a series of alarm actions such as alarming, air-exhausting, switch tripping and so on (according to the specific user setting).
Product Features
● Advanced microprocessor technology
● High-brightness LED digital tube or liquid crystal display
● RS485 output, conform to MODBUS RTU communication protocol (optional).
● Three-wire system 4~20mA analog output and SPDT relay output (optional)
● Explosion-proof type of 12~30V direct-current power supply
● Fast reaction speed and high measurement accuracy
● Possessing a display device, there are conspicuous alarm lighting or plus sound alarming (optional) in a dark environment.
● Sensor: adopt catalytic combustion sensor to detect combustible gas, whereas utilize advanced chemical sensor to detect oxygen and toxic gases.
● Maintenance costs are low
Technical Indices
| Applicable objects | This system supports the input signals of each standard sensor, such as CO gas sensor, HS gas sensor, H2 gas sensor, SO2 gas sensor, CH₄ gas sensor, O2 gas sensor, CL gas sensor, flammable gases sensors etc. |
| Sensor Model | Combustible /Toxic gas series |
| Response time | ≤30 seconds |
| Working voltage | DC 24V |
| Operating environment | Temperature: -10℃~50℃; relative humidity: <95% (no condensation). |
| System power | Maximum power<1W |
| Electric current output | 4-20mA |
| Relay control port | Passive and normally opening output, can be connected to 220VAC power supply system. |
| External dimensions | Diameter×Height(cm): 10.3×10.5 |
| System connecting cable requirements | Adopt 3-wire or 4-wire connection method, single-core wire diameter ≥1.5mm, line length ≤1000m. |
Application Fields
Petrochemical, natural gas, industrial gases, semiconductor industry, drying industry, food industry, electric power industry, machinery manufacturing, air separation industry, pharmaceutical industry and so forth.
Previous page
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.