ST9509CN model of Analysis System for Hydrogen Purification Process
Keywords:
hydrogen
positive pressure explosion-proof
Category:
Hydrogen energy
Hotline:
Warm reminder: It can be customizable as per actual requirements, welcome to call (or email) us for inquiry!
Product Overview
Pressure swing adsorption (PSA) gas separation and purification technology has become a production process and independent unit operation process in the large-scale chemical industry, it developed rapidly in the 1960s. In order to make full use of dry-gas resources, the 0.1Mt/a combined equipment of which ethylbenzene/styrene were made from catalytic dry gas has been built. Both hydrocarbonization tail gas and dehydrogenation tail gas that are discharged from the combined equipment contain a considerable amount of hydrogen gases, if they were burned off as fuel, then about 3,500 tons of pure hydrogen would be burned up every year, which is a pity! If the hydrogen in both hydrocarbonization tail gas and dehydrogenation tail gas are all purified and used for meeting the demand of the refined hydrogenation device under constructing at that time, then it can not only make full use of resources, but also avoid the shortcomings of high investment & high energy consumption due to producing hydrogen by means of utilizing light oil or adopting the conversion method of the refinery-gas steam.
There are many kinds of raw gases for hydrogen production equipment using hydrocarbonization tail gas. Under normal circumstances, the hydrocarbonization tail gas from the ethylbenzene device, the dehydrogenation tail gas from the styrene device, the hydrogenation tail gas returned from the hydrogenation device and the part of catalytic dry gases, as well as the catalytic dry gas of which is used alone while the ethylbenzene device is shut down; Secondly, the ingredients are extremely complex: In addition to H2, it also contains a certain amount of hydrocarbon ingredients such as N2, O2, CO, CO2, CH4, C2H4, C2H6 and C5+ etc.; Thirdly, the adsorption pressure is low, only about 0.50MPa. In order to ensure reliability of the equipment as well as the quality and recovery rate of the product hydrogen, it is consequently decided that the equipment adopts an advanced and reliable process flow of “pretreatment + TSA + VPSA + deoxygenation”. Firstly the raw gas undergoes pretreatment to remove a small amount of droplets and a part of C6, and then undergoes temperature-swing-adsorption (TSA) to remove the ingredients above C5+; lastly the raw gas goes through the processes of pressure-swing-adsorption (PSA) and deoxygenation, so as to attain the separation of H2 from impurities ingredients such as N2, O2, CO, CO2, CH4, C2+ and so on. Based on these correlative processes, the ST9509CN model of hydrogen purification process analysis system that is launched by our company can fully satisfy this requirement.
Product Features
1.Design of reliability, stability, and accuracy can ensure overall operation quality of the system.
2. The high-performance analytical instrument of being selected & being configured ensures the accuracy of analysis data and service life of the instrument, with high stability, long calibration cycle and low maintenance workload.
3. The latest reversely-blowing technology enables maintenance-free operation of the sampling probe, thus completely solving the problem of sampling probe blockage and greatly improving product reliability.
4. Six-level safety filtration, and equipped with high-precision oil fume filter and water mist filter. Therefore it is absolutely guaranteed that the gas entering the analyzer is dry and dust-free, ensuring the accuracy of the instrument analysis.
System Composition
The online analysis system includes a sampling system, a pretreatment system, a calibration system, an online analyzer, a sub-cabinet and its public utilities etc.
Application Areas
Petroleum and Petrochemical / Natural Gas / Metallurgy / Hydrogen Energy and other industries.
Next page
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.