RH100 type of Gas Alarm Controller
It can hook up 250 bus detectors of digital communication mode, or input from analog signal detector of 32 channels & 4-20mA.
Keywords:
relay
detector
transmitter
Category:
Gas detection & alarm device
Hotline:
Product Overview
Send out alarming signals to alert people to take appropriate measures, preventing dangers such as explosions and fires. It is able to record alarm events, fault events, operation records and other information, making it convenient for users to query and trace. These functions are helpful to analyze and manage alarming situation & system operational circumstance.
Product parameters
Host capacity | It can hook up 250 bus detectors of digital communication mode, or input from analog signal detector of 32 channels & 4-20mA; analog channel and digital channel can’t be used at the same time. |
Liquid crystal | 5.1-inch, resolution of 320*240. |
Processor | ARM7 |
The detected gases | O₂, CO, H₂S, CL₂, and combustible gas etc. |
Display style | You can choose to display 4 per page or 14 per page |
Inspection interval | 0.2s |
Page turn interval | 4s-14s (adjustable) |
Single channel display | It only monitors the gas concentration of a single transmitter |
Online Settings | The parameters, calibration and zero adjustment of the bus transmitter can be set online. |
Switch output | 1 public relay, if configured a control box with some relays, then there would be 32 configurable relays and 1 public relay; if configured with an 8-channel relay control board, then it would has 8 configurable relays. |
Real-name input | Chinese characters, numbers, letters, and installation address of this device can be entered. |
Data storage | More than 3200 gas alarming messages and startup records can be stored, and adopt a storage method of cyclic coverage. |
Communication interface | 2-channel RS232, 2-channel RS485. RS485 of serial port 1 communicates with bus transmitter. Serial port 2 can be connected to a 32-channel relay control box (optional), and can be connected with main computer so as to read alarming records & parameters of the gas alarm controller. Standard Modbus RTU output (optional); standard Modbus TCP output (optional, requires Ethernet-to-serial port module). |
Communication rate | 9600bps (by default) |
Transmission distance | The maximum distance between detector and this gas alarm controller is ≤1,000 meters. |
Installation mode | Wall-mounted installation |
Mains power supply | AC 220V±15%, 50Hz±1%. |
Power supply of transmitter | DC 24V |
Working temperature | -10℃~50℃ |
Ambient humidity | ≤95% RH |
Application fields
Electric Power Plant / Petroleum and Petrochemical / Natural Gas / Iron and Steel Metallurgy / Environmental Protection & Sewage Treatment and other industries.
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.