AP360L type of Intelligent Paramagnetic Oxygen Analyzer
The AP360L type of intelligent paramagnetic oxygen analyzer is a magnetic pressure oxygen analyzer, it is designed based on the high magnetic susceptibility of oxygen.
Keywords:
oxygen
intelligent
Category:
Electrochemical / Infrared / Thermal conductivity
Hotline:
Friendly reminder: The measuring range can be customized according to actual requirements, welcome to inquire us by phone (or email) for consultation!
Product Description
AP360L type of intelligent paramagnetic oxygen analyzer belongs to the magnetic pressure oxygen analyzer category, it is designed based on the high magnetic susceptibility of oxygen. The magnetic susceptibility of oxygen gas is several hundreds times higher than those of general gases. The magnetic susceptibility of the mixed gas entirely depends on its oxygen content, in this way, the oxygen content can be determined according to the magnetic susceptibility of the mixed gas.
Technical Parameters
1. Range: 0–100% (range optional)
2. Resolution: 0.1%
3. Zero drift: ≤±2% F.S./7d
4. Span drift: ≤±2% F.S./7d
5. Accuracy: ≤±1% F.S
6. Output fluctuation: ≤ ±0.5% F.S
7. Linearity error: ≤ ±1% F.S
8. Warm-up time: ≤ 10 minutes
9. Response time T90: ≤ 60 seconds
10. The isolated DC electric current: 0/4 mA to 10/20 mA, maximum load resistance: 500Ω.
11. Touch point capacity: 120VAC/1A, 24VDC/1A.
Ordering and Packing Description
No. | Name | Quantity | Unit | Remarks |
1 | AP360L type of intelligent paramagnetic oxygen analyzer | 1 | set | Model description: AP360L |
2 | Power cable | 1 | strip | |
3 | Factory inspection report | 1 | copy | |
4 | Manual, Certificate of conformity, Warranty card, joints. | 1 | suite |
Product Characteristics
1. Online monitoring with pure physical analysis principle, very advanced sensors.
2. Manual/automatic calibration and dual-range automatic switching.
3. Provides fully isolated output signals for calibration, fault, alarm, range switching, and other statuses.
4. Equipped with a standard RS232 communication interface, compatible with monitoring software of process analyzer.
Application Fields
Regulate the optimal ratio between combustion and ventilation in the process control equipment in some industries such as thermal power plants, cement plants, metallurgy etc. Analysis of oxygen concentration in fertilizer plants, chemical industry, hydrogen industry and other sectors; oxygen content monitoring in hyperbaric oxygen chamber; as well as gaseous oxygen content measurement in laboratory combusting tests.
Previous page
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.