ST9509CN Hydrogen Purification Process Analysis System
Keywords:
Category:
Hydrogen Purification Process Analysis System
Hotline:
Friendly Reminder : Customizable based on actual needs—welcome to call for more information.
Product Overview
Pressure Swing Adsorption (PSA) gas separation and purification technology has become a key production process and an independent unit operation in large-scale chemical industries. It has rapidly developed since the 1960s. To make full use of dry gas resources, a combined plant with a capacity of 0.1 Mt/a was constructed for the catalytic conversion of dry gas into ethylbenzene/styrene. The hydrocarbon tail gas and dehydrogenation tail gas discharged from this combined plant contain a substantial amount of hydrogen. If this hydrogen were simply burned as fuel, approximately 3,500 tons of pure hydrogen would be wasted annually—a significant loss. By purifying the hydrogen from these tail gases and using it to meet the hydrogen demand of the hydrogenation refining units currently under construction, we could not only make the most of our resources but also avoid the drawbacks associated with hydrogen production via steam reforming of light oil or refinery gas—namely, high capital investment and energy consumption.
The hydrogen production unit utilizing hydrocarbon tail gas has a wide variety of feedstock gases. Under normal operating conditions, it uses hydrocarbon tail gas from the ethylbenzene unit, dehydrogenation tail gas from the styrene unit, hydrogenated tail gas returned from the hydrogenation unit, and a portion of catalytic dry gas. When the ethylbenzene unit is shut down, only catalytic dry gas is used exclusively. Second, the feedstock composition is exceptionally complex: in addition to H2, it also contains significant amounts of N2, O2, CO, CO2, CH4, C2H4, C2H6, and hydrocarbons with carbon numbers greater than or equal to C5. Third, the adsorption pressure is relatively low, at only about 0.50 MPa. To ensure the reliability of the unit as well as the quality and recovery rate of the hydrogen product, the unit adopts an advanced and reliable process flow consisting of “pre-treatment + TSA + VPSA + Deoxygenation.” The feedstock gas first undergoes pre-treatment to remove minor liquid droplets and some C6 components. It then passes through temperature swing adsorption (TSA) to eliminate components with carbon numbers greater than or equal to C5. Finally, after undergoing pressure swing adsorption (VPSA) and a deoxygenation step, the H2 is separated from impurities such as N2, O2, CO, CO2, CH4, and C2+ hydrocarbons. Based on these process requirements, the ST9509 hydrogen purification process analysis system developed by Xi'an Ruiheng Company fully meets these specifications.
Product Features
1. Reliability, stability, and accuracy design ensure the overall operational quality of the system.
2. The optional high-performance analytical instruments ensure the accuracy of analytical data and extend the instrument’s service life. They feature high stability, a long calibration cycle, and require minimal maintenance.
3. The latest back-blowing technology enables the sampling probe to operate maintenance-free, completely resolving the issue of probe blockage and significantly enhancing product reliability.
4. Six-level safety filtration, equipped with high-precision oil-smoke filters and mist filters, absolutely ensures that the gas entering the analyzer is dry and dust-free, thereby guaranteeing accurate instrument analysis.
System Composition
The online analysis system comprises a sampling system, a pre-processing system, a calibration system, an online analyzer, a sub-cabinet, and associated utilities.
Application areas
Petroleum & Petrochemical / Natural Gas / Metallurgy / Hydrogen Energy and Other Industries
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.