RHCK600 Wall-Mounted Intelligent Infrared Multi-Component Analyzer
The RHCK600 wall-mounted intelligent infrared gas analyzer is a non-dispersive infrared gas analyzer.
Keywords:
Category:
Gas analyzer
Hotline:
Friendly Reminder : We can customize the measurement range according to your specific needs. Feel free to call for more information.
Product Overview
The RHCK600 wall-mounted intelligent infrared gas analyzer is a non-dispersive infrared gas analyzer. Its operating principle is based on the selective absorption of infrared radiation by certain gases. It employs a single light source, a single-tube half-cell gas chamber, and an advanced serial thin-film microphone detector. Compared with similar products, this analyzer stands out for its high stability, high reliability, and high selectivity.
Technical Parameters
1. Measurement indicators: CO, CO2, CH4, C3H8, SO2, NO, NO2
2. Measurement method: NDIR non-dispersive infrared
3. Measurement Ranges: CO, CO2, CH4, C3H8: 0–100%; SO2, NO, NO2: 0–5% (measurement ranges can be configured according to actual user needs).
4. Resolution: CO, CO2, CH4, C3H8, SO2, NO, NO2: 0.01%
5. Accuracy: CO, CO2, CH4, C3H8, SO2, NO, NO2: ≤ ±1% FS
6. Repeatability error: CO, CO2, CH4, C3H8, SO2, NO, NO2: ≤1%
7. Optimal flow rate: 0.7–1.2 L/min
8. Intake pressure: 2 kPa - 50 kPa
9. Sample gas requirements: dust-free, water-free, and oil-free.
10. Response time: T90 < 10s (NDIR)
11. Signal Output: RS-232 digital output, 4-20mA analog output
12. Power supply: AC 220V 50Hz
13. Explosion-proof rating: ExdⅡCT6
Product Features
1. Employs originally imported infrared sensors from Germany, offering long lifespan, high sensitivity, and fast response speed.
2. Equipped with a built-in precision filter, significantly extending the sensor’s lifespan.
3. Large-screen touch display that simultaneously shows the measured gas concentration, date, time, and instrument’s internal temperature, among other parameters.
4. Scheduled automatic storage function, allowing you to view stored data and curves at any time.
5. The upper and lower control points can be set arbitrarily within the full measurement range.
6. Standard RS232 or RS485 communication port, enabling bidirectional communication with a computer.
Application areas
It is used for the continuous analysis of the concentrations of various gases—including CO, CO2, CH4, SO2, NH3, NO2, and NO—in mixtures. It finds wide application in industries such as chemical engineering, petroleum, and metallurgy, as well as in sectors including environmental protection, agriculture, and healthcare.
Previous page
Next page
Previous page
Next page
Other products
ST9700CN type of Cement Kiln Analysis System
Control the combustion of cement kilns, and analyze the gases concentrations of CO, O2, CO2, SO2 and other gases in the smoke chamber of kiln tail.
View detailsAir Separation Process Analysis System
In the petrochemical and metallurgical industries, air separation & purification equipment are widely used to separate O2, N2, Ar and other rare gases from the air, and take these gases as raw material gas as well as on-site protective gas.
View detailsST9800CN type of Exhaust Gas Purification Analysis System for closed Silicon-Manganese Furnace
The ST9800CN type of exhaust gas purification analysis system for closed silicon-manganese furnace (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of the closed silicon-manganese furnace process equipment.
View detailsST9800CN type of Positive Pressure Explosion-proof Analysis System
The ST9800CN type of positive pressure explosion-proof analysis system (hereinafter referred to as the device) is a safety monitoring interlock device, which is specially designed & manufactured for operation and production of positive pressure explosion-proof process equipment.
View detailsST9100CN type of Coke-Oven Coal Gas Analysis System
Coke-oven coal gas is an important by-product in the coke production process, it can be used as recycled energy in power plants and can be used as household coal gas as well, it is also able to be reused as raw material gas for synthetic natural gas/LNG.
View detailsST9500cn type of Explosion-proof Oxygen Analysis System for Natural Gas Process
The ST9500CN type of explosion-proof oxygen analysis system for natural gas process (hereinafter referred to as the device) is a safety monitoring & interlocking device, which is specially designed and manufactured for the operation & production of explosion-proof process equipment in accordance with specific processes.
View detailsRH2000CN type of Natural Gas Dew-Point Analysis System
LNG is the abbreviation for Liquefied Natural Gas, which is a product of natural gas that has been purified and cooled to a liquid state under ultra-low temperature conditions. The composition of LNG not only determines its usage characteristics but also holds significant importance for process design, accounting, and practical applications.
View detailsRHCK 590LEx type of Analysis System for Ammonia-Cracked Hydrogen Production
In order to realize real-time, continuous and accurate online monitoring of the hydrogen concentration in the cracking gases which are produced by the ammonia-cracked furnace; promptly provide feedback on the working conditions of cracking reaction; and guide the optimization of process parameters (furnace temperature, ammonia feed amount, system pressure) as well as eliminate problems such as hidden cracking-hazards and sub-standard hydrogen purity etc. Therefore this technical solution of online hydrogen analyzer is specially formulated, so as to provide data support for full-process automated control and operation of the ammonia-cracked furnace.
View detailsST9800CN type of Online Analysis System for Calcium Carbide Furnace Exhaust Gas
The ST9800CN type of online analysis system for calcium carbide furnace exhaust gas (hereinafter referred to as the device) is a safely monitoring & interlocking device, which is specially designed and manufactured for operation & production of calcium carbide furnace process equipment.
View detailsST9800CN type of process analysis system for closed calcium carbide furnace is modularly designed according to specific working condition parameters & requirements of calcium carbide furnace factory---as well as by means of adopting our company’s mature sampling pretreatment technology and analysis & control technology.
View detailsRHCK350LEx type of Oxygen Content Online Analysis System
The RHCK350LEx type of oxygen content online analysis system is used for analyzing oxygen content in gas pipelines. The online analysis system consists of a sampling system, a pretreatment system, a calibration system, an explosion-proof oxygen gas analyzer, a sub-cabinet, and its public utilities etc.
View detailsST9600CN type of Analysis System for Petrochemical Industry
This system provides enterprises with overall solutions that meet actual needs, targeting the common characteristics of the petrochemical industry, such as numerous devices, complex operating conditions, and high hazard levels.
View detailsONLINE MESSAGE
*Note: Please ensure that the information you provide is accurate and that your contact details remain up-to-date. We will get in touch with you as soon as possible.